This site uses cookies to offer you a better browsing experience. By continuing to navigate through this site or by clicking Approve, you consent to the use of cookies on your device as described in our privacy notice.
CHAMBER FURNACES-CWF
CHAMBER FURNACES-CWF

CHAMBER FURNACES-CWF

The CWF range of general purpose laboratory chamber furnaces is bench mounted. Models are available in five sizes with a maximum operating temperature up to 1300 °C.

The airflow in the CWF-B furnaces is enhanced by the addition of air inlet holes in the door and a tall chimney which rapidly removes the fumes from the furnace.

The CWF-BAL furnace with integral balance can be used for thermogravimetric analysis (TGA) and loss on ignition (LOI) applications, where weight change of the sample must be monitored during the heating process. This is required, for example, in the determination of inorganic matter content in materials such as cement, lime, calcinated bauxite and refractories. For applications involving organic matter content, please refer to the AAF-BAL.

Enquiry

Options (Specify These At Time Of Order)

  • A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications - more information
  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • A range of metallic retorts to work with modified atmospheres up to 1150°C
  • AMS2750E Nadcap compatible models are available for aerospace applications
  • CWF-BAL: 8 kg balance with a resolution of 0.1 g

Technical Details

Airflow in CWF-B
  • Air inlets through the door plug
  • Chimney pulls air through the chamber
  • Airflow through the chamber promotes burning of the samples

Features

  • 1100°C, 1200°C or 1300°C maximum operating temperature
  • 5, 13, 23, 36 or 65 litre chamber volumes
  • Carbolite Gero 301 controller, with single ramp to set-point & process timer
  • Vertical lift door keeps heated surface away from the user
  • Soft closing door on 5, 13, 21 & 23 litre models
  • Delayed start / process timer function as standard
  • Hard wearing alumina element carrier, furnace entrance and hearth
  • Energy efficient low thermal mass insulation
  • Free radiating wire wound elements for optimum uniformity
  • Easy access to elements & controls simplifies maintenance & servicing
  • CWF-B: Enhanced airflow from tall chimney & door vents for full combustion
  • CWF-BAL: With integrated balance that runs independently of the furnace control system
  • CWF-BAL: Software supplied with the balance may be used to monitor the balance reading via a computer
  • CWF-BAL: Maximum capacity of balance is 3 kg with a resolution of 0.01 g (other capacities available)

Technical Resources

LABORATORY/INDUSTRIAL OVENS & FURNACES

INDUSTRIAL OVENS & FURNACES

VIEW

ACCESSORIES & CONSUMABLES

ACCESSORIES

VIEW

CWF 11/13 with CC-T1 programmer option

LABORATORY CHAMBER FURNACE - CWF CWF

VIEW

CEMENT TESTING FOR COMPLIANCE

CEMENT TESTING FOR COMPLIANCE

VIEW

HEAT TREATING 3D ADDITIVE MANUFACTURED PARTS

HEAT TREATING 3D ADDITIVE

VIEW

CWF 13/36 WITH 2416 CONTROLLER

CWF 13/36 WITH 2416 CONTROLLER

VIEW

CWF 11/23 WITH 301 CONTROLLER

CWF 11/23 WITH 301 CONTROLLER

VIEW

CWF 12/5 WITH 3216 CONTROLLER

CWF 12/5 WITH 3216 CONTROLLER

VIEW

GPC 13/65 WITH NO CONTROLS SECTION

GPC 13/65 WITH NO CONTROLS SECTION

VIEW

Contact Us at +9714 2152799

We can help you with a solution tailor to your specific need.