This site uses cookies to offer you a better browsing experience. By continuing to navigate through this site or by clicking Approve, you consent to the use of cookies on your device as described in our privacy notice.
Compression Mounting
Compression Mounting
Compression Mounting
Compression Mounting

Compression Mounting

The Fastest Mounting Press Designed for 24/7 Use. Eliminate bottlenecks at the mounting stage, rapidly transforming your cut samples to specimens ready for grinding and polishing.

The SimpliMet 4000 mounting press, was tested in extreme conditions, and simulated the duty cycle of the busiest labs in the world, providing high reliability in continuous use environments.

The automatic SimpliMet 4000 mounting press packs fast mounting cycles into limited bench space, optimizing productivity. By replacing older, slower, larger mounting presses; capacity can be doubled for the same amount of space.

Use your mounting press out of the box without the wait. New employees can be trained quickly and efficiently.
 

Enquiry

Specifications

SimpliMet 4000 Mounting Press Specifications
Operation Automatic Electrohydrolics
Mounting Mold Sizes English: 1", 1.25", 1.5"
Metric: 25mm, 30mm, 40mm, 50mm
Mounting Parameters
Pressure 1000 - 4400psi(70 - 300bars) operational pressure range +/- 10%

Adjustable in 50psi (5bar) increments

Preload pressure function applies gradual presssure for delicate specimens 350psi (24bar)
Heat Time User Selectable time from 1-20 minutes
Heating Tempurature 120° F - 420° F (50° C - 220° C) operation tempurature range
Heating Power 1500 Watt@115VAC / 1900 Watt@230VAC
Cooling Time User Selectable or Smart Cool

User Selectable time from 1-30 minutes

Adjustable in 10 second increments

Smart Cool Intelligent cooling system automatically cools until sample temperature reaches 40°C
Thermoplasmic Function Automatically sets correct parameters fro thermoplastic resins such as TransOptic TM and cools the mount in a contolled, linear fashion appropriate for the mounting media
Noise Level Max 62 dB maximum at 1 meter from the front of the machine, while raising and lowering the ram with the mold closure open
Working Environment Tempurature: 40° F to 104° F / 5° C to 40° C

Humidity: 30 - 90% humidity, non-condensing
Electrical
Voltage/Frequency 85-264VAC, 50/60Hz 1 phase
Water inlet 1/4" OD tubing or 3/8" OD tubing
Water Outlet Drain: 1/4" ID x 1/3" OD hose
Vent: 1/4" ID x 1/2" OD hose
Length 26.00" 660mm
Length from rear of machine to front feet 21.25" 540mm
Width 12.25" 311mm
Height Closed 19.62" 498mm
Height Open 20.62" 524mm
Weight 120lbs 54kg
Compliance CE, PSE, RoHS, WEEE

Ordering

Benefits

simpliMet-4K-close-top
High reliability in 24/7 use envirionments

  • The SimpliMet 4000, was tested in extreme conditions, and simulated the duty cycle of the busiestlabs in the world, providing high reliability in continuous use environments.

SimpliMet-4K-front-top-up
Optimize Productivity in Your Space

  • The SimpliMet 4000 packs fast mounting cycles into limited bench space, optimizing productivity. By replacing older, slower, larger presses; capacity can be doubled for the same amount of space.
  • Fast duplex mounting allows two mounts to be made during the same cycle with negligible increase in cycle time.

simpliMet4K-sideview
Ease of use saves time and protects sample quality

  • Simple user interface eliminates errors and protects the quality of your sample prep. Everything you need is right on the front panel.
  • Use your press out of the box without the wait. New employees can be trained quickly and efficiently.

simpliMet4K-side-view-top-down
Comfortable to use

  • The single handed closure mechanism engages quickly, moving you right into your next task.

SimpliMet 4000 Mounting Press Demo

This video demonstrates how to use the SimpliMet 4000 mounting press to mount a steel sample in a 1.25-inch mount using EpoMet.

SimpliMet 4000 Mounting Press Introduction

The SimpliMet 4000 is the fastest mounting press and designed for 24/7 use.

Introducing the SimpliMet 4000 Mounting Press

Introducing the SimpliMet 4000 Mounting Press for an efficient, reliable process.

Contact Us at +9714 2152799

We can help you with a solution tailor to your specific need.